Dripper flow rates: 1.4 / 2.3 / 3.1 / 4.3 / 10 l/h Dripline diameters: 16 mm Dripline wall thickness: 0.9 and 1.15 mm
RootGuard® configuration is available for extra protection against root intrusion in SDI systems.
» Row crops » Orchards » Landscaping » Vineyards » Vegetables » Gardening
Landscape
Orchards
Row crops
IDIT dripper
Model |
Inside Diameter (mm) |
Wall Thickness (mm) | Min. Working Pressure (bar) | Max. Working Pressure (bar) | Exponent | Kd |
---|---|---|---|---|---|---|
IDIT 16 | 13.8 | 0.9 | 0.8 | 3.5 | 0.51-0.53 | 0.25-0.3 |
1.15 | 4.3 |
* For efficient dripline flushing, the recommended minimum working pressure is 0.8 bar.
Max. Lateral Length (ID 13.8 mm, WT 0.9 mm, Inlet Pressure 2.5 bar)
Nominal Flow Rate (l/h) |
Spacing between Drippers (m) |
||||||
---|---|---|---|---|---|---|---|
1.4 | 0.20 | 0.30 | 0.40 | 0.50 | 0.60 | 0.75 | 1.00 |
1.6 | 62 | 84 | 102 | 119 | 135 | 156 | 190 |
2.3 | 44 | 59 | 72 | 84 | 96 | 111 | 135 |
3.1 | 35 | 48 | 59 | 70 | 79 | 92 | 112 |
4.3 | 29 | 39 | 48 | 56 | 64 | 75 | 91 |
10.0 | 16 | 22 | 28 | 33 | 37 | 43 | 53 |
» On flat ground » At 10% flow variation » Representative table only. For further information, please refer to the Irrimetzer software.
Model |
Lateral Length (m) |
Number of Coils |
||
---|---|---|---|---|
Coil | 20′ | 40′ | 40’HC | |
IDIT 16 | 400 | 150 | 300 | 326 |